TIN Printing Oven offered comes backed by latest technology support and can be operated with maximum speed of 6000 sheets/hr with working temperatures up to 230 degrees and maximum sheet size of 1143×965 mm. We can also offer the equipment with accessories support including procedure temperature controller, printer support, RS485 port and communication and other options. Some of its features include comes with continuous working air blower and tunnel support, allows maintenance of stable working chamber temperature, independent alarm system, automatic control of temperature among others.
TRUCTURE: The structure for the full length of the oven will be fabricated by 75 * 40 mm channels and 50 * 50 mm angles and reinforced with cross frame jigs and gusset plates. The structures shall be erected at every 5 ft. distance and connected with 50 * 50 mm running angles.
CONVEYOR BAND: The three tier conveyor will be of S.S.-304 tray type with 6" pitch roller chain. The dyno drive will be provided to vari the speed of conveyor.
INSULATING PANELS: All the top, side and bottom insulating panels shall be fabricated from CRCA prime quality sheets. The 4" gap in the panels will be filled with mineral wool to conserve heat and increase efficiency. The extreme bottom portion on both sides of the oven shall be covered ith CRCA sheets. Jointing covers with minerals wool be used for jointing the individual panels to avoid leakages and heat loss.
FIRING CHAMBERS: There shall be 1 no. stainless steel shell in shell type heat exchanger with firing chamber having exhaust fan mounted on the top of the chamber. The Bentone Automatic Oil burner with complete control system and the main circulating blowers shall be mounted on the either sides of the chamber. Complete chamber with suction box shall be insulated with glass/mineral wool panels and coverings to avoid heat loss, increasing the thermal efficiency.
AIR DUCTS: Both sides air circulation ducts with perforated holes are fabricated by 18 swg CRCA sheets. The main connecting & supply ducts are made of Stainless Steel. The adjustable dampers are provided at appropriate intervals to have uniform circulation of hot air throughout the length.
ELECTRICALS: The electric motors such as 10 HP 2 nos. for main circulating fan, 0.3 HP 1 no. for burner, 5 HP 1 no. for driving, 1 HP 1 no. for exhaust and 3 HP 1 no. for extract are included in this quotation. D.O.L. starters for lower H.P. and Star Delta for 10 HP, with indicators and control instruments shall be fitted in the control panel. The wiring from control panel to motors and incoming to the control panel are excluded from this quotation. The guarantee for electrical instruments and accessories shall not be covered by us.